If your fan light starts to shake after using it for a period of time, first check if the blade holder is deformed or sagging, and also check if the screws that fix the blades are loose.The solution is to turn off the fan and stop it, shake the blades up and down by hand to see if they are loose, confirm, and then tighten the fixed blade holder or blade screws.
The fan does not rotate or rotates slowly. After being powered on, the remote control or wall switch cannot start the fan, the fan blades do not rotate, or the fan rotates slowly after being used for a period of time.
Solution: First, replace the battery of the remote control handle, press the remote control switch to check if there is a “beep” feedback from the receiver. If the receiver emits a “beep” alarm sound after power on, it means the receiver is damaged and needs to be replaced; After power on, there is a “beep” sound feedback, but there is no “beep” alarm sound. However, when the remote control switch is pressed, there is a “beep” alarm sound that does not rotate, indicating that the fan is disconnected or short circuited. Further inspection of the wiring is needed. After using the motor for a period of time, the speed slows down, mostly due to capacitor attenuation. Replacing the capacitor can solve the problem.
If the remote control is not sensitive or cannot be controlled properly after use, first rule out whether the remote control battery needs to be replaced. If there is no “beep” feedback when turning on the wall switch and the light does not light up, it is judged that the receiver is damaged; If there is an uncontrollable phenomenon during use, it is necessary to pair the remote control again and learn successfully.
Solution: The remote control receiver is damaged and the entire remote control needs to be replaced; Learn the remote control again and find the remote control manual. Each remote control manual indicates the corresponding learning method. Follow the steps to learn again.
If the fan rotating light does not light up and the light source does not light up or flickers after using the fan light for a period of time, it is considered normal electrical component loss, except for wiring problems.
Solution: If the light source flickers, the light source driver needs to be replaced; If the light source is not working, first remove the receiver and directly connect the light wire to eliminate the problem of remote control damage mentioned in the third point above. After confirming that it is a light source problem, replace the entire set of light sources.
Fan rotation noise is high. After normal use, there may be support noise, bearing noise, or electromagnetic noise. Generally, first check if the fixing screws of the blades, lamps, etc. are loose, which may cause friction between the operating blades and the lamp panel, resulting in noise.
Solution: If there is any loose screw, it can be re fixed. If there is bearing or electromagnetic noise, it needs to be returned to the factory for processing.
The above are all the problems that we may encounter during use, which we can judge and solve on our own. If you encounter problems that cannot be solved on your own, please contact after-sales service for assistance!
The Gesheng fan light brand motor has a 10-year warranty, ensuring worry free use and after-sales service for customers and friends.
Post time: Mar-30-2024